posted
Turn your ignition key to the "run" position - with out starting your engine. Then, press the trip odometer button down for about 12 seconds. When the "oil change" light starts blinking the system is reset. The reset will be complete when the oil change light goes out.
-------------------- Vance Chula 1996 Camaro Z28 SS #1688 2002 Camaro RS #0438 Posts: 10 | From: San Diego, CA | Registered: Aug 2003
| IP: Logged
posted
There is another way also turn the key on without starting and press the gas pedal to the floor 3 times will reset it
-------------------- Willard (Mike) Scott Worldwide Camaro Club North Carolina state Rep. 2001 SS convertible with all SLP opts. Sunset Orange Neutral top Neutral leather http://community.webshots.com/user/wmss Posts: 737 | From: Siler City N.C. | Registered: Sep 2003
| IP: Logged
posted
Remember, though, to do this procedure (i.e., step on the accelerator pedal all the way down 3 times) within 5 seconds -- that's before the preliminary diagnostic lights prove out. Then switch to "Off" position as if to save the change.
If done successfully, the next time you start your engine, the "oil change" light will not be lit anymore.
Posts: 17 | From: Atlanta, GA | Registered: Apr 2002
| IP: Logged
Printer-friendly view of this topic
