posted
Got the Black Billet grill and '69 SS grill badge. Now I need to bend the badge to fit the grill. Obviously I do not want to melt the paint or break the badge.
Any ideas are appreciated!
------------------ '01 SS #1618 Pewter Vert, M6 My Conveyance
posted
Hi Chab, The difference in the angles of the badge and the grill are too great. The badge doesn't even come close to matching up with the billet. I was thinking of trying to heat the badge. But I am concerned about the paint.
I wonder if the '67 or '68 SS grill badge has less of an angle. (more flat)
quote:Originally posted by Scott Chab: Instead of bending it can you file/grind off some of the material on the back to match the contour of the grill?
All I did was take a hair dryer to it and heated up real slow. Then very (carefuly) spread the SS emblem out. I did this about three times to get the right angle to fit the grill. This is cast aluminum so you need to go real SLOW....
hope this helps you out...
Paul
Posts: 254 | From: Littleton, MA. USA | Registered: Feb 2000
| IP: Logged
posted
Hey Paul, Thanks! I will try that tonight. Did you bend the mounting posts on the back of the badge also?
Posts: 465 | From: B'ham, AL | Registered: Sep 2000
| IP: Logged
posted
The tabs are going to spread out with the emblem itself. Can't be helped! You will break them if you try to bend the tabs (too much of a angle). Like I said this is soft metal and it can't be bent to far.
Good luck
Posts: 254 | From: Littleton, MA. USA | Registered: Feb 2000
| IP: Logged
posted
As most know, I'am the first to do this combo.... I broke the emblem in half .. then just attached it to the grille using custom mounting metal plates with speed nuts .. then cut the studs flush with nuts using a cutoff tool.
Believe it or not the emblem broke straight and clean.
Thinking of a change thou .. maybe a red outline SS emblem ... or maybe a wings west grille.
JimW
[This message has been edited by SS3816 (edited 20 December 2000).]
posted
I am waiting on my third badge from Year One. I sent one back and cut one like Jim Did.The third badge is on back order.I hope this is the one that fits best.It's a 68 SS/RS badge. I will post my results.It would be great if RK Sport sold them in a package together.
------------------ SEE YA !! F99-0729 SLP ATS SLP Chrome Wheels SLP Exhaust SLP Y Pipe SLP Bilstein shocks B&B TIPS BMR Shock Tower Brace BMR Control Arms BMR ADJ.Pan Hard Rod BMR Relocater Brackets LPW Aluminum Dif.Cover Hurst Billet Plus Shifter Eibach PRO Springs LS1 Motor Sports Lid World Camaro Club SFC's thesignconnection.com Decal Package
posted
Has anyone thought to compare the SS emblem from a Chevelle with the one from a Camaro to see if the angle is different? There might be a difference between years and brands, so don't just limit yourself to Camaro.
Printer-friendly view of this topic
You will break them if you try to bend the tabs (too much of a angle). Like I said this is soft metal and it can't be bent to far. 
