posted
Does Bragg-Smith use aftermarket pedals for heel-toe instruction? If so, do you know which ones? I need to buy some, so I thought I'd get the same ones that I'll be learning on in May.
posted
No, the fabricated tthe accelerator pedal themselves. Very simple but effective design. They should sell them!
Posts: 5946 | From: Litchfield, NH, USA | Registered: Feb 2000
| IP: Logged
I found them on an SLP thread along with some others. I'm not generally a big carbon fan, but these are the only ones I've seen that maintain a lower profile (people won't be looking between my legs when they get in the car....or at least not because of the pedals )
Posts: 43 | From: Lombard, IL, USA | Registered: Aug 2001
| IP: Logged
posted
I don't know where Steve da Wrench stashed the template. If he reads the board later, maybe he'll see this and be able to help you out. If we're lucky, he'll have it at the shop and be able to send it from there....otherwise it could be anyone's guess as to where it is at the house!
Those Carbon Fiber pedals are o.k. in shape, but I don't really care for the C.F. look.
Maybe you could get the billet pedals like some of our other members have and paint them? I don't know if that would affect the grip, but it's a thought if you're looking to make them less noticeable.
posted
I've got the Mallory pedals on my 3rd Gen, as well as my SS, and they're top quality, functional and made in the US of A.
Posts: 1446 | From: Germantown, MD USA | Registered: Feb 2000
| IP: Logged
posted
Like Dan said, we got them after our first year at B.S.
I believe we had Tom Byrne run a G.P. on them.
Maybe he'll do it again.
-------------------- Hawkeye: SSOA F98-C98
1998 SS - Black All Options - Mods Whisper Lid, K & N, Lou's Short Stick, Shift Light, Skip Shift, SLP Y, Borla, 4:10's, BMR STB, SLP SFCs, Granatelli MAF, Hypertech III, 160 Stat, Mallory Billet Pedals, Metco Aluminum LCAs,Fast Toys Ram Air Mod, Spohn Panhard Bar, BMR Torque Arm, free EGR mod,power antenna, BMR LCA brackets, Gentex Temp/Compass Auto Dim Mirror, AllMaxx Strobe and Wig Wag, BAER Eradispeed rotors,PPC Headers with Random Technology Hi Flow Cats, BMR Drive shaft Loop,FAST 78MM Throttle Body, FAST 78MM Composite Intake, Mobil 1 & lots of Zaino.
posted
Thanks for the input, folks! I just ordered the srpracing pedals. People seem to be pretty happy with these. Maybe I can paint them if they end up being too flashy.
Matt
Posts: 43 | From: Lombard, IL, USA | Registered: Aug 2001
| IP: Logged
posted
Here are some pedal pictures I took when I was at Bragg-Smith:
I've been driving around for weeks with a piece of 1/8" black ABS attached to a spare throttle pad. The shape is similar (essentially 1/2" wider on the left) and it works well. I'll post some pictures sometime soon.
Printer-friendly view of this topic
)
