posted 31 July, 2001 07:29 PM
Hey all, I've had my Wolfe 6pt bar in for many months but my tonneau covers have been parked because they don't fit the two rear bars that mount just behind the back seat.
Have any of you with this bar or similar setup modded your covers to fit? I've seen one or two in car mags. I am going to tackle this project (maybe next spring) and am looking for ideas.
I'm even thinking of modding them to accept a handful of cool Dzus fasteners.
-------------------- 99SS#1380 vert blk/blk/neut hotcam, Macs, SY4000, Strange 12bolt 12.4 @ 110.4 with a 1.735 60'
posted 02 August, 2001 07:34 AM
I was thinking about the exact same thing if I end up with the Wolfe rollbar. You might think about marking the places and using a dremel tool to carve out the openings. Just a thought. Hard to say since I haven't seen how the rollbar fits yet. You might also want to see if you can find an extra tonneau cover just in case of a mistake.
[ 02 August 2001: Message edited by: Red Dog ]
-------------------- Doug Smith Camaro SS Convertible #1328
Posts: 61 | From: Leesburg, VA | Registered: Mar 2001
| IP: Logged
posted 02 August, 2001 12:26 PM
Cool idea....if you do get some pics of any rides like this, please post them. I'm totally interested in this concept. I imagine you could do the same setup that RKSport has...put some of that door hinge rubber stuff around the parts that are cut to clean it up a bit.
posted 03 August, 2001 09:11 PM
i certainly have. and i had to buy a set when i got my car it didnt have them. i bought them with the intention of doin it. I rule I am the man. car is in the shop as soon as i get it back ill send pics. i also have my cage covered in padding and i have exact matching vinyl that i will cover it with
-------------------- 97 ss #150... slp stage 3, lakewood lca's, wolfe roll cage, rci 5 points, 16" white ss rims
soon to come... cc306 and vortech Posts: 37 | From: dallas, texas | Registered: Jul 2001
| IP: Logged
Printer-friendly view of this topic
