This is topic Restoring a 1980 Z-28 - questions in forum F-Body: Technical Forum at www.chirpthird.com.


To visit this topic, use this URL:
http://www.chirpthird.com/ubbcgi/ultimatebb.cgi/ubb/get_topic/f/2/t/000236.html

Posted by CamaroSCG (Member # 1591) on :
 
A friend of mine is thinking about restoring her 1980 Z-28. It needs a fair amount of bodywork because of rust and some motor work. She wants to return the motor to stock. Where can she get estimates, info, and prices for restored 2nd gen Camaros, etc.? She lives in Delaware. So far, I came up with these, any more good places?
Restoring-
http://www.camaro-restorations.com/
Restoring Services
Camaro Hi-Performance
c/o Jerry MacNeish
5750 Kinsmen Courage Ct.
Eldersburg, MD 21784
http://www.z28camaro.com/restosvcs.html
Camaro Restoration Handbook: Ground-Up or Sectional Restoration Tips and Techniques for 1967 to 1981 Camaros. All Models Included
http://www.dropbears.com/amazon/asinsearch_0895863758.html
http://www.coast2camaro.com/services.html
http://nastyz28.com/2gcog/stegmiller/
http://www.nastyz28.com/2gcog/oldnews.html
 
Posted by ChuckSSter (Member # 1800) on :
 
Being a owner of a 2nd Gen I guess I can give you some tips that I have experenced . 1st Nasty Z28 is the place you can get all the info you will ever need , Its the bible when it comes to 2nd gens . Plus they have a swap section for the hard to find parts . Have her check the site out it has a wealth of info its a must . Parts cost are tough , but theres a bunch of companys that sell what you need . I use Classic Camaro , Year One , Ecklers Camaro Parts ( there new they have WCC Camaro Club also ) . They pretty much all sell the same stuff , as for body panels you have to be real carefull . Cheap is not the best way , theres a bunch of sellers whos panels fit but dont line up good wit exsiting GM Parts . Gm parts can be hard to find or REAL costly . I suggest useing Goodmark panels , by the way GM sells Goodmark also.They cost a bit more but well worth it . All these parts companys have web sites and have wish list functions so you can see what the cost are . I havnt seen the car but I can tell you its expencive if your not doing any of the work your self . As for Restorers I dont know any in that area , and I would use one close to home . I personally do most of my own work , its part of the fun but I dont get into things I am not sure of . I have a garage that I trust to do all the stuff I wont try , plus I have a body shop I trust to do all the paint work or body work . 2nd Gen Camaros are great fun & are great collector cars , just check out everything before she gets in to far , plan ahead . Sorry this is so long but I could talk about this for hours as I love Camaros . Hers a pic of mine , you can e-mail me if you would like to talk more . Hope this helps some  -
 
Posted by 2002Z4CSS (Member # 1393) on :
 
I agree with Chuck on the cheap body panels.You are better off having a GM 1/4 panel cut off a parts car than to use some of the inferior body panels out there. See if there is a local Camaro club or any other car club in your area that a member used a local body shop to do the restoration work.Ask for pictures of the restoration process.Good luck on your 1980 Z28.I also used to own a 1980 Z28 that was charcoal grey with the oyster interior with a rare M21 close ratio H.D. 4 speed trans. [Smile]
 
Posted by CamaroSCG (Member # 1591) on :
 
Thanks! I'll pass this on to her, or just the link to this post. [Smile]
 


Powered by Infopop Corporation
UBB.classic™ 6.7.0