This is topic Recommendations for performance mod in forum SSOA: "Back Porch" at www.chirpthird.com.


To visit this topic, use this URL:
http://www.chirpthird.com/ubbcgi/ultimatebb.cgi/ubb/get_topic/f/3/t/011699.html

Posted by DWCamaro69 (Member # 1498) on :
 
It is time for the first engine mod and would welcome recommendations on what would be the next logical mod considering what we have to start with (see signature below), but we are basically talking about an stock '02 SS w/345 hp SLP package w/dual/dual exhaust. Prefer reasonably priced bolt-on suggestions. Thanks.
 
Posted by 2002Z4CSS (Member # 1393) on :
 
Pulleys or long tube headers would be a good start. [Smile]
 
Posted by M3EATER (Member # 1731) on :
 
Here's some suggestions.... not knowing just what SLP mods you already have.....

An air filter lid (SLP, MTI, others) & filter

MAF (SLP, Granetelli)

If you're up to the cost.... Headers will give you the most gains without opening the engine. Don't bother with short tubes...very little, if any, gains. If you're going to do it, go long tube.

Gordon
www.provenperformanceconcepts.com

 -
 
Posted by 6T9 Z11 (Member # 1715) on :
 
4.11 gears and if it's set up for drag racing get rid of that 1 and ??? front sway bar [Cool]
 
Posted by M3EATER (Member # 1731) on :
 
Ahh yes... GEARS. Always a good idea! And, with the 6sp... the gas mileage is still fine.
 
Posted by Stealth Performance (Member # 1072) on :
 
Slp Bolt on SFC's and STB and a Airaid Filter.

Mike
 
Posted by poSSum (Member # 119) on :
 
What are your objectives?
 
Posted by HTWLSS (Member # 117) on :
 
Steve's done some installations on a few new SS's, including an Anniversary car, that showed some nice gains.

The most impressive combination of mods so far has been on Ken Fender's SS. He's in our area and turned out some nice #'s on the dyno.

If Ken sees this, I'm sure he'll like to tell you about his mods, and if you give Steve a holler, he can tell you about the other cars he's helped on.
 
Posted by DWCamaro69 (Member # 1498) on :
 
Thanks for all the responses! My goals are not specific, just a little more horsepower. Have put 10K on the car and we are used to the power and would just like to do a little something to feel a little more in the seat of the pants. Keep the great suggestions coming! What about a "Y" pipe change? Any gains to be had there?
 
Posted by Kevin V 2002 SS (Member # 1025) on :
 
I've got the 4.10 gears and it is a definite noticeable improvement. I'm mostly doing suspension mods right now, the cars already have all kinds of power, I want the car to be able to handle it before I add more power.
 
Posted by poSSum (Member # 119) on :
 
quote:
Originally posted by DWCamaro69:
to feel a little more in the seat of the pants.

4.10's will give you that. [Smile]
 


Powered by Infopop Corporation
UBB.classic™ 6.7.0