This is topic Mod's for Comp T/A #57. in forum CTAOA: Owners Forum at www.chirpthird.com.


To visit this topic, use this URL:
http://www.chirpthird.com/ubbcgi/ultimatebb.cgi/ubb/get_topic/f/8/t/000160.html

---

Posted by Mike Comp T/A #57 (Member # 1012) on 06 October, 2003 07:36 PM:
 
For those who have asked here is the current modification's for Comp T/A #57. 600HP


STOCK PARTS:

engine
cam
tuning
transmission
torque converter
rear end with 3.23 gears
panhard bar
cat back exhaust


FREE MODS:

1LE Alum. drive shaft
Removed screen from MAF
Bypassed coolant from flowing through throttle body.
Removed EGR system
Removed air pump
Opened up hood scoop baffle
Removed louvers from air box
Fan switch
Torque Converter lock up switch
Engine Tie Down Torque Strap


BOLT ONS:

LT4 Cylinder Heads
LT4 Intake
LT4 1.6 Roller Rocker Arms
LT4 Knock Module
Jet Hot Long Tube Headers 1 3/4"
Mufflex Y-Pipe with cutout
LPE Billet Alum. valve covers (polished) with breather
Polished LPE 52mm Throttle Body with air foil and LPE plate
NGK TR6 spark plugs (gapped .035)
MSD 6A
MSD coil
MSD spark plug wires
K & N air filter
SVO 24lb Fuel Injectors
160 degree thermostat
Meziere Electric Water Pump
Hypertech (for fans only)
Water Wetter
Mobil 1 0w30 syn. oil
inline electric fuel pump


NITROUS:

NOS #5176 Dry Nitrous System (125hp jets) Hidden 1200psi bottle pressure
Progressive controller (100% on @.5 seconds)
Remote On/Off bottle valve
Bottle heater
Bottle blanket
Nitrous pressure gauge
Billet nitrous filter
100 octane unleaded racing gas.


SUSPENSION:

Spohn Adj. Torque Arm with driveshaft loop (set @ -2 degrees)
QA1 12 way adj. Front Shocks with V6 springs (set @ #1)
QA1 12 way adj. Rear Shocks (set @ #4)
LCA Relocation Brackets and Poly Bushings (middle setting)
Boxed lower control arms
Sub Frame Connectors
Strut tower brace
BFG Comp T/A 275/40/17 drag radials
Air bag passenger side rear 20psi
Drilled and slotted brake rotors

So far I have spent $8,000




[ 07. October 2004, 04:28 PM: Message edited by: Mike Comp T/A #57 ]
 

---

Posted by KenC (Member # 189) on 03 December, 2003 06:05 AM:
 
and who says that "beating the clock" is not alot of trouble and exspensive..........?


 

---

Posted by Mike Comp T/A #57 (Member # 1012) on 29 March, 2004 04:37 PM:
 
Just think what it will take me to get in the 9's!
 

---

UBB.classic™ 6.7.0