I work for a major textile company. We do work for all the dealers as far as Uniforms, Carpets etc. So as a gift my coworkers had this SS 3x10' industrial rug made for me ( They know the SS is in a carpeted garage) Its official Chevy Blue and I think they did a good job. They also made me a White Polo shirt with the same logo so it matches my car. Im glad I work with good people !
------------------ F99-0447 1 of 30 Arctic White A4 Coupes.
Posts: 277 | From: Peoria, AZ | Registered: Feb 2000
| IP: Logged
posted
You can tell they have great love and respect for you! That shows deep consideration. Any chance they can make more? Posts: 918 | From: Davie, Fl., USA | Registered: Feb 2000
| IP: Logged
Thanks, I am truly grateful that they thought that much about it. They all know my pride in the SS and at our awards banquet I was moved by the amount of thought involved. I can put you in touch with the guy in our company who handles all the logo rugs for the National accounts. Email me if you have any questions. (The guy is a die hard Ford guy!)
------------------ F99-0447 1 of 30 Arctic White A4 Coupes.
Posts: 277 | From: Peoria, AZ | Registered: Feb 2000
| IP: Logged
posted
Yeah the SS sits on industrial carpet, living in Binghamton you know how cold the floor can get ( I can move the carpeting out easy enough and I work for a textile giant so its not to hard for me to get what I need) plus the carpet holds the moisture level way down, concrete gives up a lot of moisture.
Posts: 277 | From: Peoria, AZ | Registered: Feb 2000
| IP: Logged
posted
That was reeealy considerate of your company and co-workers. It's not that often that you see that kind of thought for an employee.
------------------ Mike - Maryland Chapter Director, MAFBA
A Zaino'd Hugger coupe, w/a Grey cloth interior and an A4. In addition, there's an SLP OEM Diff cover w/drain plug, SLP SFC's and PanHard Rod and BMR's STB that has been installed. It has the airbox raised for a little more fresh air with a Whisper Lid on top and fuel rail covers added for show. It has always run on Mobil 1. GMPP DuraStop pads on all four corners & GMPP front rotors help to control the 3510 lb 'beast' on the street and at the track. A current member of MAFB, MAFBA, NASA, SCCA & SSOA. Here's some action shots of my HOSS On Track
Posts: 1446 | From: Germantown, MD USA | Registered: Feb 2000
| IP: Logged
posted
Joe, that is most cool indeed. Do you work with Italians??!! Just kidding. I think that is great that you all work so well together.
Posts: 5946 | From: Litchfield, NH, USA | Registered: Feb 2000
| IP: Logged
posted
Well, everyone here thought you worked on a dock or did masonary work. Ha Ha
Posts: 5946 | From: Litchfield, NH, USA | Registered: Feb 2000
| IP: Logged
posted
Good point Steve, I would pay to have a carpet of some sort done for my garage.
Posts: 5946 | From: Litchfield, NH, USA | Registered: Feb 2000
| IP: Logged
posted
That is soooooo cool! What a great group you work with.
------------------ Cetera (Teri) Heino 1999 SS #0069 and everything else. [IMG]http://banners.wunderground.com/banner/gizmotimetempbig/US/OR/hillsboro.gif[/IMG]
Posts: 7198 | From: Near Portland, Oregon, USA | Registered: Feb 2000
| IP: Logged
posted
Joe That came out great Tell Wayne he did a nice job really surprised he didn't make it with the ord badge I won't say that F word here just to brake your chops
Posts: 27 | From: Phoenix,AZ | Registered: Apr 2000
| IP: Logged
posted
Hello car fans, I might be a Ford guy but it's in my genes.I WAS the second owner of a really cool '63 Impala SS black with red interior. and a 327 (or 307?)real sweet car with it's two speed tranny and twin rear mounted sloping antanas!( I can't get Joe to change his SS like that) I will post next week with prices etc. I think I started some thing. Custom orders will be available for a small extra charge.
quote:Originally posted by akbossman: Hello car fans,I will post next week with prices etc. I think I started some thing. Custom orders will be available for a small extra charge.
Oh, woooo hooooo!!!!!! You definitely started something!
posted
Please email me at OF02G@aol.com for any info you may need. These are custom made so what I had made for Joe's "Glacier Queen" was custom but I paid the art fee so it is now no extra charge to produce that mat and two others that have art work done.#2 has red outline on the "SS" (look I even got them right side up! pretty good for a Ford guy.)#3 mat has a silver back ground and red "SS" outline. Prices here include UPS Ground in the USA. 3x5 $157, 2 or more $117 each. 4x6 $240, 2 or more $165 each 3x10 $297 2 or more $207 each (This is like Joe's seen in first post above.
TAKE 10% OFF UNTIL DECEMBER 31, 2000 so I can make a group order! These are rubber backed industrial mats and will last you guys almost forever. They are the same mats we rent and clean for years before they even start to wear. Visa/Master Card accepted and delivery time is three to four weeks. SSpecial orders for almost any logo etc accepted and low art work fees.
posted
Please email me at OF02G@aol.com for any info you may need. These are custom made so what I had made for Joe's "Glacier Queen" was custom but I paid the art fee so it is now no extra charge to produce that mat and two others that have art work done.#2 has red outline on the "SS" (look I even got them right side up! pretty good for a Ford guy.)#3 mat has a silver back ground and red "SS" outline. Prices here include UPS Ground in the USA. 3x5 $157, 2 or more $117 each. 4x6 $240, 2 or more $165 each 3x10 $297 2 or more $207 each (This is like Joe's seen in first post above.
TAKE 10% OFF UNTIL DECEMBER 31, 2000 so I can make a group order! These are rubber backed industrial mats and will last you guys almost forever. They are the same mats we rent and clean for years before they even start to wear. Visa/Master Card accepted and delivery time is three to four weeks. SSpecial orders for almost any logo etc accepted and low art work fees.
posted
Please email me at OF02G@aol.com for any info you may need. These are custom made so what I had made for Joe's "Glacier Queen" was custom but I paid the art fee so it is now no extra charge to produce that mat and two others that have art work done.#2 has red outline on the "SS" (look I even got them right side up! pretty good for a Ford guy.)#3 mat has a silver back ground and red "SS" outline. Prices here include UPS Ground in the USA. 3x5 $157, 2 or more $117 each. 4x6 $240, 2 or more $165 each 3x10 $297 2 or more $207 each (This is like Joe's seen in first post above.
TAKE 10% OFF UNTIL DECEMBER 31, 2000 so I can make a group order! These are rubber backed industrial mats and will last you guys almost forever. They are the same mats we rent and clean for years before they even start to wear. Visa/Master Card accepted and delivery time is three to four weeks. SSpecial orders for almost any logo etc accepted and low art work fees.
posted
I now have prices etc. Please email me with inquiries etc. at OF02G@aol.com thankSS. SSpecial prices until 12-31-00 as a Christmas Present/peace offering for a Ford guy.Custom orders available for any logo etc.
posted
That is really neat! It is neat to see that you work with such wonderful people.
------------------ Amy F00-1724 2000 SS Navy Blue Metallic/ Black Top, Ebony Leather, ASR, SLP Floor Mats, car cover, dash plaque and Key fobs BMR STB, SLP SS Chrome 10 spokes with SS Centercap, Carbon Fiber Whisper Lid, SLP SS Grille, Camaro SS Fuel Rail Covers and PerfeXshine Tulsa Firebird and Camaro Club Member: http://www.lt1.net/tfcc/ COFBA Member: http://www.cofba.com SSOA Founding Member: http://www.ssoa.net
posted
Are they all paisans?? That is great! I hope you sell a ton of them. Merry Christmas.
Posts: 5946 | From: Litchfield, NH, USA | Registered: Feb 2000
| IP: Logged
posted
1-3-01 is the last chance at a discout see earlier posts and thanks for the space. Posts: 13 | From: Wasilla,Alaska, USA (really) | Registered: Apr 2000
| IP: Logged
Printer-friendly view of this topic
