posted
What do you all think about these Meg's Exhaust Tips. I was thinking of replacing my stock SLP Loudmouth Dual/Dual's with these: http://www.banzaisports.com/megs/dual.htm
What do you think? The Straight Cut or Angle Cut. Thanks...Rich
--------------------
2001 Camaro SS #1569: Onyx Black / Neutral Leather, T-Top, SLP Loudmouth Exhaust with Megs ST-293 Dual/Dual tips, SLP Floor Mats, SLP dash plaque and key fobs, SLP SFC, SLP !CAGS, Hotchkis STB, Tbyrne Carbon Fiber Whisper Lid, Zaino.
posted
I would go for the angle cut and the 3" outlets. They would look sweet I was considering about getting those but the price to get to Canada was too expensive. They were going to be $200 Cdn. a side. OUch too rich for my blood. I just polished my 3.5" Loudmouth tips.
-------------------- Curtis Knops www.thefbody.com My website Stage II milled 6.0L heads Thunder Racing TR224 Cam LS6 Intake Jet Hot LT headers, no cats Magnaflow Exhaust 12.4@116.4mph on BFG G-force KD's 6spd, stock rear...
Posts: 671 | From: Saskatoon SK Canada | Registered: Feb 2000
| IP: Logged
posted
hey bud like i said over on slp just make sure you cut nback the stock pipes so you cant see the 1 pipe turn into 2 pipes thewn it will look sweet
posted
These look way sweet on the SS if you have chrome rims,it kinda adds a balance if you know what I mean ?? They cost big bucks though !!I`ve seen both and the angles arent very sharp and do look way Cool !!Make DAM SURE you have someone that can weld realy good !!
10spk.
quote:Originally posted by 2001SS: What do you all think about these Meg's Exhaust Tips. I was thinking of replacing my stock SLP Loudmouth Dual/Dual's with these: http://www.banzaisports.com/megs/dual.htm
What do you think? The Straight Cut or Angle Cut. Thanks...Rich
Posts: 21 | From: Lonestar State | Registered: Mar 2001
| IP: Logged
posted
I had some angle cut 3.5" dual dual Megs tips installed about 2 months ago and I just love 'em. Like said above - they really go well with chrome rims.
[ 09 April 2001: Message edited by: NexuSS-6 ]
-------------------- o 2001 M6 SS 1LE Onyx/Ebony Hardtop (#1225) o Y2Y : 1LE/g-Force TA KDs/Dual-Dual/Auburn/ZR1 5 spokes/SS grille/mats/fobs/cover/deck mat/portfolio) o Mods : !CAGS / Hotchkis STB, LCAs, APHR / BMR LCA brackets / MTI Lid+K&N / 80-series Flow / Eibach Pro-Kit / FTRA
Posts: 114 | From: Plano, Texas | Registered: Aug 2000
| IP: Logged
posted
[QUOTE]Originally posted by NexuSS-6: [QB]I had some angle cut 3.5" dual dual Megs tips installed about 2 months ago and I just love 'em. Like said above - they really go well with chrome rims.
Thanks for the info. I think I will order the Megs Angle Cut 3.5" Duals. They sure do like nice on your car. And yes I will make sure the Loudmouth's single pipe is not showing under the car.
--------------------
2001 Camaro SS #1569: Onyx Black / Neutral Leather, T-Top, SLP Loudmouth Exhaust with Megs ST-293 Dual/Dual tips, SLP Floor Mats, SLP dash plaque and key fobs, SLP SFC, SLP !CAGS, Hotchkis STB, Tbyrne Carbon Fiber Whisper Lid, Zaino.
posted
Got a question for you guys. Im getting my 2001 SS in about a week or so and I was going to get the loudmouth also, but I love those mega's dual angle tips. Which tips do I need to get so they connect nicely to the loudmouth?
ST295 3" 3 1/2" 13" Angle Weld
OR
ST293 2 1/2" 3 1/2" 13" Angle Weld
I know I want the outlet diameter to be 3.5" but what about the tail pipe diameter for the loudmouth? Is it 2.5" or 3" ? or does it matter?
quote:Originally posted by brocktor: Got a question for you guys. Im getting my 2001 SS in about a week or so and I was going to get the loudmouth also, but I love those mega's dual angle tips. Which tips do I need to get so they connect nicely to the loudmouth?
ST295 3" 3 1/2" 13" Angle Weld
OR
ST293 2 1/2" 3 1/2" 13" Angle Weld
I know I want the outlet diameter to be 3.5" but what about the tail pipe diameter for the loudmouth? Is it 2.5" or 3" ? or does it matter?
Thanks in advance!
Joe
Get the ST-293's. I had them put on my Loudmouth's. They are 2.5" on the inlet which is the thickness of the loudmouth's pipe. They look great on my 2001 SS. I was going to have them mounted flush with my bumper but I had them installed about 2" past my bumper. They look awesome. I will post some pictures when I get around to taking some pictures of my install.
Rich...
--------------------
2001 Camaro SS #1569: Onyx Black / Neutral Leather, T-Top, SLP Loudmouth Exhaust with Megs ST-293 Dual/Dual tips, SLP Floor Mats, SLP dash plaque and key fobs, SLP SFC, SLP !CAGS, Hotchkis STB, Tbyrne Carbon Fiber Whisper Lid, Zaino.
Printer-friendly view of this topic
![[Smile]](smile.gif)
