posted
2002 Z28 A4 (2.73:1) 15000mi, export version (288HP rated with the V6 one on the left exhaust), Gas 95 octan mods: CAI, SLP PP air lid, SLP 85mm MAF, bellow, 1.85:1 SLP rocker arm package (spring and ti retainers), SLP Y-pipe and SLP PP dual-dual carback. Everything installed by LS1tech. The car is pulling really hard and everything is fine. Oil changed on the same day.
The dyno is a Bosch: The mesure was done on "2" (not D... ), speed 103mph, temp 29°C (85°F) and press 964mbar (725mmHg)... corrected the car pulled only 309rwHP wich appeared to be very low with so much mods...with a 12% driveloss 346HP. I was waiting something like 335rwHP. Does anybody has an idea of what's wrong?
And a last thing I don't understand: the curve went up to the limiter (6200rpm) and then cut. So my car has 309rwHP@6200rpm
-------------------- 2002 export Z28, 1 of 9 sold in Switzerland. Lots of SLP PP mods... Posts: 19 | From: Switzerland | Registered: Aug 2003
| IP: Logged
posted
In the United Stated the most popular dyno is a Dynojet dyno. The numbers from your dyno can not be compared to the ones you see posted here. The two dyno calculate rwhp differently.
posted
No but you got mail. BTW a 2000 Vette A4 with dual K&N conical, 80mm TB, 1.85:1 SLP rocker arms, Bassani X-pipe and B&B exhaust put 386rwHP on "D" on the same dyno 3 months ago.
-------------------- 2002 export Z28, 1 of 9 sold in Switzerland. Lots of SLP PP mods... Posts: 19 | From: Switzerland | Registered: Aug 2003
| IP: Logged
posted
Considering the CAI won't dyno, Bellow and MAF may not yield anything, Y-pipe is questionable too, I don't think the numbers are that bad. remember you can't just add up all the numbers that the ads say and figure to have that much more HP.
Your right though the peak at 6200 is odd
-------------------- 99 Black SS #0275 Posts: 189 | From: Steeler Country | Registered: Jan 2001
| IP: Logged
Printer-friendly view of this topic
![[Confused]](confused.gif)
