posted
I need help locating a man by the name of David Chernicoff.I bought a set of GTP LT4 stage II heads and intake from him but I need the part number of the gasket he used. He used a company by the name of SCE Gaskets Inc. I found the company and a local distributor on the web, but I need more info. I used ARP head bolts and Felpro gaskets, but the heads are receiver grooved and allowed coolant to seap by into the cylindars -NOT GOOD !!! His set up worked and I need to get to COMP FEST ! He said he is on the Mid-Atlantic F-Body board and I know some of you have contacts there. Please offer any assistance that you can. My cas is really putting a burden on my mechanics garage. Thanks!
Bob Tomaso
-------------------- Comp T/A # 31 of 164. World of Wheels winner in Jan. 2002 - First in Class. Mods: GTP Stage II LT4 heads and intake - port matched,CC 306 cam, 30 lb SVO injectors, MSD Ignition, AS&M Headders, BB Tri-Flo exhaust, Moser 28 spline rear end with an Eaton posi and 4.10 gears, B&M Ripper Shifter, Sphoon LCA's, Alston sub frames, strut tower brace, aluminum driveshaft, driveshaft loop, custom PCM tunning, LS1 brake swap in front chromed/polished bracket and caliper, and Baer Eradispeed rotors front and rear. 387 RWHP & 342LBS RWTQ - ET's to come once clutch is replaced. Most work performed by Tom Izzo of Speed Inc. (LS1speed.com) Highly recommended.
Posts: 38 | From: Bartlett, IL | Registered: May 2001
| IP: Logged
posted
Never mind !!! I found him! See you all at Compfest !!!!
-------------------- Comp T/A # 31 of 164. World of Wheels winner in Jan. 2002 - First in Class. Mods: GTP Stage II LT4 heads and intake - port matched,CC 306 cam, 30 lb SVO injectors, MSD Ignition, AS&M Headders, BB Tri-Flo exhaust, Moser 28 spline rear end with an Eaton posi and 4.10 gears, B&M Ripper Shifter, Sphoon LCA's, Alston sub frames, strut tower brace, aluminum driveshaft, driveshaft loop, custom PCM tunning, LS1 brake swap in front chromed/polished bracket and caliper, and Baer Eradispeed rotors front and rear. 387 RWHP & 342LBS RWTQ - ET's to come once clutch is replaced. Most work performed by Tom Izzo of Speed Inc. (LS1speed.com) Highly recommended. Posts: 38 | From: Bartlett, IL | Registered: May 2001
| IP: Logged
Printer-friendly view of this topic
