posted
This is the second time I've tried to get MAC Headers installed. The first time, the passenger side header (which was missing the EGR hookup) would not clear a cross member at the collector of the header-right before it goes into the y-pipe. After notching the flange, the header and y-pipe would not align with the driver side header. MAC sent me another passenger side header. I tried to get them installed today, and the flange on the collector from the passenger side header won't clear a cross member. (same as before) I called MAC and they say the header should fit on coupes and convertibles (my first theory). I am sending them some pics. Did anyone have any problems like this-did you have to notch anything, or such? Thanks. Ryan
-------------------- 1990 Camaro RS 350 Black Ttop Black/Grey Interior '91 Z28 Spoiler and Hood, '92 Z28 Wheels A4,2 Chamber Flowmaster
1995 Camaro Z28 Conv. Patriot Red M6 Tan Top-Tan leather interior 17" ZR-1 Wheels on BFG 275/40/ZR17's LT-4 Hot Cam, springs, rockers FASTCHIP reprogram (Ed Wright) 2 Chamber Flowmaster, 3" Flowtech Cutout
1997 Pontiac Grand Prix GT Red (Wife's Car) 3.8L V-6 Graphite Leather Int. Loaded to the core Posts: 12 | From: Arlington, TX | Registered: Jan 2002
| IP: Logged