posted
like the subject says, my rear window seal connected to the top is coming apart towards the bottom, about 1" right now. is thier anything i can do about it, maybe some type of glue or something to seal it back together. any suggestions are appreciated. thanks Posts: 1 | From: San Antonio, Texas | Registered: Mar 2002
| IP: Logged
posted
1st of all Welcome to the board! Is it stitching that is comming loose? You should take the car to an automotive trim show and see what they recommend the fix be.
-------------------- Current ride is: 2002 Brickyard 400 35th Anniversary LE convertible #22,SLP build# 0036,35th Anniversary Build #47 EMCC Member #234 www.emcamaro.org WCA Member #197582 MMCC Member #28 NEOCC Member #634 Posts: 5682 | From: Dearborn,Mi. | Registered: Feb 2002
| IP: Logged
posted
I had the same problem on mine last summer... Once it starts letting go, it goes quick, especiall if you frequently put your top up and down. If you catch it right away... as in there's only a one or two inch gap that has come apart, a guy at a top shop told me to use an epoxy sealant/adhesive. I tried that on mine, but it didn't work... of course I had to glue together at least a foot of glass to vinyl too. I ended up just replacing the back window.... which, by the way, isn't all that hard to do yourself on an F-body.
Posts: 10 | Registered: Feb 2002
| IP: Logged
Printer-friendly view of this topic
