posted
My top is badly leaking on the passenger side where the top seal above the window meets the seal going down the side of the window. I'm not soo positive it is the seal though. When I look at the drivers side window and top, i see the top overhangs the window a lot on that side. but on the passenger side it is not overhanging at all. Is it possible for the top to shift to one side, or is it possible that the top shrunk. Either way can this be fixed.
1995 silver Formula convertible. Aftermarket slp RAM AIR. K&N air filter, 160 thermo, Edelbrock headers, Borla catback, underdrive crank pulley,Throttle-body bypass. 60' 2.154, 1/4 14.087@98.17mph, good tires should have me in the high 13s. Posts: 21 | Registered: Feb 2002
| IP: Logged
posted
Mine's doing practically the same thing on the driver's side. I'm going to take the door apart next weekend and try to work on the window alignment some. I'll let you know how things come out.
-------------------- SOLD!!! 96 Conv. Z, ported MAF, airfoil, Magnaflow 3" exhaust, ASM CAI, Granatelli STB, Hurst Billet Plus, LT4 KM, Eldelbrocks with no cats, 4.10s, 13.3 @ 104.
NEW! 02 Dakota Quad...a few things under the hood. 13.0 @ 105 Posts: 9 | From: Montgomery AL | Registered: Jul 2001
| IP: Logged
posted
You should be able to align the top of the door glass to correct the problem.
Posts: 5682 | From: Dearborn,Mi. | Registered: Feb 2002
| IP: Logged
posted
Sounds like what we experienced when we took delivery of our SS.
It ended up the rubbery piece of molding that's just inside the door where the door, glass and top all meet. No problem since we replaced it w/a new piece.
posted
Mine was leaking somewhere near the driverside door- the top would seal shut tight but it leaked like a SOB even while washing the car. Turned out that the door needed to be realigned.
Posts: 37 | From: Seattle, WA USA | Registered: Jun 2001
| IP: Logged
Printer-friendly view of this topic
