quote:
Originally posted by DanA_F99_1977:
What no charge for the ejection seat?
...punchin' through the steel roof is too hard on the ole head...
...curtain down...
quote:
Originally posted by DanA_F99_1977:
Yea, but that armor piercing point at the top of yours should work
...wrong head...
But, 01 SunsetOrange, after seeing your sig, I just decided what's next:
Sway Bars!! Why didn't I do that yet 
I'll prolly go with Hotchkis.
Cool! Something to look forward to!
On the Z06 I have a billet aluminum coolant cover and a billet aluminim shift knob with Z06 on the top.
quote:
Originally posted by DanA_F99_1977:
...........................Also ordered a small can of POR 15 gray to try an area on the garrage floor. If it works out well, I will paint the whole floor.
Dan,
The POR will be spendy to do the whole garage. We're going with some aircraft hangar paint from the local Mson's supply. It'll cost <$500 to do our whole garage (approx 2000 sq. ft.).
Stu
ProFormance MotorSports
[ 18 September 2001: Message edited by: 01SunsetOrangeSS ]
Hopefully headers and y-pipe soon.
YIKESS
quote:
Originally posted by JohnS:
The hanger paint is awsome stuff. It's epoxy based and dries smooth, hard and shiny. Only down side is that it's slippery when wet. http://camaross.tripod.ca/canada_md_wht.gif[/IMG][/QB][/QUOTE]Thanks Teri and John. Execllent idea. I will look into that. After I get the outside and all the trim painted, maybe I'll ge tthe floor done.
Posted by 01SunsetOrangeSS (Member # 846) on :
Just ordered 2001 LS6 heads and cam to complete my LS6 conversion on my car. That should provide me with about a total of 385 RWHP. That should be enough to shut up my friend with his Ford Lightening. Last mod will be a
Progcharger with about 8lbs boost. That should finally bring me to about 450 RWHP.I'm sure at that point I'll need a 12 bolt Moser rear end. Boy it's a good thing I own an aftermarket performance company.
Posted by 2K1SunsetSS (Member # 854) on :
A cover.Tom
Posted by 01SunsetOrangeSS (Member # 846) on :
New set of BFG KDW's. Boy are they sweet!
Posted by 01SunsetOrangeSS (Member # 846) on :
Just added JBA Ceramic Coated Headers[ 17 December 2001: Message edited by: 01SunsetOrangeSS ]
Posted by 01SunsetOrangeSS (Member # 846) on :
Adding Tokico Coil over shocks in front, adjustable Illumina shocks in the rear (Christmas) Power Slot Pro rotors will be next.
Posted by P. R. Warnke (Member # 728) on :
I added a 1991 Firebird Formula 1LE...305TPI/5Speed....Does that count?
Posted by Capster78 (Member # 1391) on :
added a 3500 yank torque converter.. and ran a hyperteck programer to get more performace from my chip
Posted by vinz96z (Member # 1348) on :
in the last couple of weeks...hypertech 160
!cags
lca's
torque arm w/ds loop
Posted by P. R. Warnke (Member # 728) on :
I did an STB! And I think my car has a 160 in it already.
Posted by GTOJohn (Member # 1401) on :
A BMR stb & BMR sfc
Posted by SS2513 (Member # 545) on :
had my windows tinted and in the next few weeks the car is going in the paint shop to get a stripe just like this....
Posted by 01SunsetOrangeSS (Member # 846) on :
Just added some new toys, Infinity Kappa 6.3 separates (speakers) in the front, 4" Kappa 2 ways in the rear, an MTXCF10 stealth box sub and a 6 channel amp with 1600 WRMS.
Posted by HM Murdock (Member # 728) on :
Still just a lid and STB![Don Adams voice]And Loving it![/Don Adams Voice]
