I have been thinking on replacing the intake manifold on my 99 SS with the Z06 intake.Is there a mod that you are aware of to do away with the EGR valve so it won't set the "service engine soon"light?
Posted by Steve da Wrench (Member # 1301) on :
Ken, you can install the intake, eliminate the egr valve, and then reflash the pcm with LS1 edit to change the parameters for the egr test. I will doing the same thing on the ls1 I am putting in my 68, but then I dont have emissions requirements. you should still be able to get by ok though.
Posted by Ken Howe Sr (Member # 196) on :
Thanks Steve, Would I remove the EGR entirly from the engine,if so,is there a plate that I can purchase to cap off the right exhaust manifold?
Posted by Steve da Wrench (Member # 1301) on :
Ken, there is no block-off plate that I know of. You will just have to make a plate (out of 1/4 steel) and bolt it in place. Or have somebody make one for you. When I get to that point, if you still dont have one, I will make one for you too.
Posted by CK-1 99SS (Member # 93) on :
