www.chirpthird.com: 1/4 mile times n/a

This is topic 1/4 mile times n/a in forum F-Body: Convertibles at www.chirpthird.com.

To visit this topic, use this URL:
http://www.chirpthird.com/ubbcgi/ultimatebb.cgi/ubb/get_topic/f/9/t/000471.html

Posted by LPE Z convt (Member # 1803) on :

Hey i was wanting to know what everybodys 1/4 miles times were n/a and what does your car weigh ...

Posted by Zedzag (Member # 1299) on :

My 1995 Z28 weighs 3740 with me in ii and about 1/4 tank of gas. Best time is 13.84 @ 103mph with a 2.2 60' Only power mods are flowmaster cat-back,offroad pipe, home made cai,lt1 edit,and airfoil. The car is lowered with an autocross style suspension. Nothing to really brag about but with a 1.8 60' it would be a 13.5.

Posted by BadAss30th (Member # 1026) on :

12.608@110 N/A POWAH ! [Razz]

I think it has more in it, hoping for 12.2-12.3. Also have a Weiand intake going on next weekend which should help a bit.

3820 lb. raceweight (with me in it).

Happy driving,
Bad30th

Posted by BadRag (Member # 1566) on :

Bad30th...those are nice numbers for a heavy a$$ed vert [Big Grin]

BadRag

Posted by 2002Z4CSS (Member # 1393) on :

My old 1997 bone stock 30th Anniversary Z28 with auto trans ran a best of 13.8 @102mph,
My old 1999 bone stock Z28 with auto ran a best of 13.50 @105.63mph,
My 2002 35th Anniversary convertible bone stock auto ran a best of 13.42 @104mph [Smile]

Posted by Z28-SORR (Member # 1565) on :

This has been asked before. Do a search.
3816lbs.(full tank), stock, only 250rwhp.
14.7 E.T. at 96.4 mph, 60' in the 2.2 to 2.3.

P.S. May be slow but it's better looking than the BadRag!!

[ 30. June 2003, 11:44 AM: Message edited by: Z28-SORR ]

Posted by Gary 97 WS6 T/A Conv (Member # 1504) on :

Just got a new best this past Friday on my Birthday and won the Richmond Dragway (Va.) Camaro/Firebird Shootout. [Smile]

I ran 12.44 @ 114.47 1.98 60' 3750 w/me race weight. Also all motor. The car is an M6

It has AFR 195 heads worked over by Eric Bradby (Tin Shed Racing [Big Grin]

) and a custom cam from Joe Overton (Lethal EFI Performance).

She put down 402.3 RWHP with little tuning. Dyno broke after flashing in the new tune so the baseline stands for now. [Smile]

Dyno Sheet

[ 30. June 2003, 01:23 PM: Message edited by: Gary 97 WS6 T/A Conv ]

Posted by BadRag (Member # 1566) on :

Z28-SORR....OK, let's see a pic...

BadRag

Posted by Z28-SORR (Member # 1565) on :

BadRag,
Sorry no linkable picts. yet. Besides I'm just envious. I really wanted a Black one. Though they might look good sitting side-by-side. To bad you live so far away.

Posted by BadRag (Member # 1566) on :

Sounds good, would like to see some other 97's.
So many happening & events in the mid west & right coast...would love to get to BG & superfeast at mich....
Oh well, guess i'll just have to deal with nice weather and beachs & bikini's.... [Big Grin]

BadRag

Posted by BadWS6 (Member # 1799) on :

Heres a west coast Vert she's 97 also

[ 29. September 2003, 11:17 PM: Message edited by: BadWS6 ]

Posted by Dan00Hawk (Member # 1190) on :

Ran a 12.52 at 114.xx (can't remember the exact mph) on a 2.04 60' this past weekend on Kuhmo MX 275/35/18's. Car dynos at 406 rwhp, and 385 rwtq. Weight with driver is 3930 lbs.

Has MTI stage II heads, and Comp Cam 224, .558, 112 LSA, Strange 12 bolt with 3.73, McLeod Street Twin, FLP headers, and assorted boltons.

Posted by Avengeance Z4C (Member # 2053) on :

*EDIT* I just realized Im in the wrong forum.. sorry. [Embarrassed]

[ 09. October 2003, 07:39 PM: Message edited by: Avengeance Z4C ]

Posted by Rickerbucks (Member # 1208) on :

Well I only got out once this year after havong installed AFR 190 heads and a FAST.

However, The rings did not seat and had a BAD oil burning problem and fouled the plugs all the time.

It was my first time on ET streets and i had four runds. Nothing very impressive as it appears I had the tire pressure WAY to high at 18#'s.

Top speed was a new best at 123 mph but best time was still a lowly 12.34 with a 1.99 60 foot and one missed shift. [Roll Eyes]

Lots of driver improvement required. Pulling the motor now for a ring job and possably some aesthetic updates.

Posted by Gary 97 WS6 T/A Conv (Member # 1504) on :

Shaun sorry to hear about the bad luck hitting you again. Hope everything works out for you in the future.

I hope to have some updated times in the next 2 weeks.

Posted by Brian's 01 SS (Member # 1499) on :

12.99 at 112 mph. My guess on weight is near 3800 lbs. Those sub frames aren't light. Also had a 2.2 60ft and only a 8.5 in the 1/8. Car's computer has not been touched yet. But tuning is in it future. I just had to have a gmmg first [Big Grin]

Posted by Gary 97 WS6 T/A Conv (Member # 1504) on :

quote:
Originally posted by Brian's 01 SS:
12.99 at 112 mph. My guess on weight is near 3800 lbs. Those sub frames aren't light. Also had a 2.2 60ft and only a 8.5 in the 1/8. Car's computer has not been touched yet. But tuning is in it future. I just had to have a gmmg first

Brian,

Carolina Auto Masters in the Raleigh area will take good care of your tune for ya. [Cool]

Posted by Gary 97 WS6 T/A Conv (Member # 1504) on :

New best today at Richmond Dragway in VA.

12.17@115.80 1.87 60' mid 70's temps.

The run was N/A. [Cool]

Posted by Diggler's HMS (Member # 1067) on :

quote:
Originally posted by Gary 97 WS6 T/A Conv:
New best today at Richmond Dragway in VA.

12.17@115.80 1.87 60' mid 70's temps.

The run was N/A.

Damn congrats Gary! Glad to see the car is running strong. I saw Mike's new ET's, so it looks like you 2 were pretty close. [Big Grin]

Posted by LPE Z convt (Member # 1803) on :

quote:
Originally posted by Gary 97 WS6 T/A Conv:
New best today at Richmond Dragway in VA.

12.17@115.80 1.87 60' mid 70's temps.

The run was N/A.

Nice times got to love that cam Joe is the man I love the way mine runs now ...... [Wink]

Posted by Brian's 01 SS (Member # 1499) on :

quote:
Originally posted by Gary 97 WS6 T/A Conv:

quote:
Originally posted by Brian's 01 SS:
12.99 at 112 mph. My guess on weight is near 3800 lbs. Those sub frames aren't light. Also had a 2.2 60ft and only a 8.5 in the 1/8. Car's computer has not been touched yet. But tuning is in it future. I just had to have a gmmg first
Brian,

Carolina Auto Masters in the Raleigh area will take good care of your tune for ya.

Thanks, I'll look into that... [Big Grin]

Posted by Gary 97 WS6 T/A Conv (Member # 1504) on :

quote:
Originally posted by Diggler's HMS:
QUOTE]Damn congrats Gary! Glad to see the car is running strong. I saw Mike's new ET's, so it looks like you 2 were pretty close.

Thanks Darren, yeah she's coming around and getting quicker. I was surprised I was so close to Mike as well but it was his first day with his new combo. When he gets his 60' figured out he'll hit 11's easily. (Mike does not drive a convertible fella's)

Yeah Chris, Joe O know's his stuff that's for sure. Can't wait to see how you do here in the near future. [Cool]

Posted by Gary 97 WS6 T/A Conv (Member # 1504) on :

Nother new best tonight 12.12 @ 116 only slightly better but I'll take it.

Posted by Gary 97 WS6 T/A Conv (Member # 1504) on :

Went back again tonight (3 weeks in a row) but had the best air quality tonight of the 3. I ran 12.02 @ 116.86 1.85 60'

Just missed 11's. [Mad]

Posted by Diggler's HMS (Member # 1067) on :

quote:
Originally posted by Gary 97 WS6 T/A Conv:
Went back again tonight (3 weeks in a row) but had the best air quality tonight of the 3. I ran 12.02 @ 116.86 1.85 60'

Just missed 11's.

Your MPH is killer, and shows you have that 11 second slip coming......but you know that already. [Big Grin]

You guys going again before the year is out?

Posted by Gary 97 WS6 T/A Conv (Member # 1504) on :

Thanks Darren. Think we're done for the season.

UBB.classic™ 6.7.0