This is topic SEATS in forum F-Body: Convertibles at www.chirpthird.com.


To visit this topic, use this URL:
http://www.chirpthird.com/ubbcgi/ultimatebb.cgi/ubb/get_topic/f/9/t/000520.html

Posted by LITG8TR (Member # 1752) on :
 
Does anyone know if the seats (front and rear) from a coupe will fit a convertible?
 
Posted by TonyJ (Member # 1232) on :
 
All 4th gen seats fit all 4th gens. The TAs have an extra plug for the power seats, but even that can be purchased and used on Camaros. The carpet color on the back of the rear seat back is the only concern...
 
Posted by 2002Z4CSS (Member # 1393) on :
 
I may be wrong,but the rear seats on a convertible may be a bit narrow than a coupe.The front seats should be the same. [Smile]
 
Posted by Xsta Z 28 (Member # 740) on :
 
Physical size of the seats are the same. The only issue I ran into with installing 1999 Trans Am Coupe seats in my 2000 Convertible, was on the rear seat buns. The metal "loop" that the bolt goes through was too short.
 
Posted by TonyJ (Member # 1232) on :
 
quote:
Originally posted by Xsta Z 28:
Physical size of the seats are the same. The only issue I ran into with installing 1999 Trans Am Coupe seats in my 2000 Convertible, was on the rear seat buns. The metal "loop" that the bolt goes through was too short.

Here's the deal on the loop. It's almost impossible to get the bolt in if you put the back of the seat bottom in first. Let the back of the seat bottom stick up while you get the bolt started. Once it's started, you can push the back down into position. Then you can finish tightening the bolt. The difference in difficulty is amazing and I just lucked into the easy way. [Cool]
 


Powered by Infopop Corporation
UBB.classic™ 6.7.0